LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Exhaust System, Emission Controls (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 26 Exhaust System, Emission Controls >> Secondary Air System >> Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING >> Removing

Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Press the release -arrows- and remove the lines -1- from the Secondary Air Injection Pump Motor -V101- -2-.

GWWM26-10052Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2- from the Secondary Air Injection Pump Motor -V101-.

GWWM26-10053Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -arrows- and the Secondary Air Injection Pump Motor -V101- -1- with the bracket.

scientia non olet · About LEMON Manuals