LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Cooling System (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following:

-- Replace the bolt for the drive wheel.

-- Drive gear installation position: the collar on the drive gear faces the transmission.

-- Position the toothed belt and tighten the bolts.

-- Fill the coolant. Refer to Prepare the cooling system for filling: .

scientia non olet · About LEMON Manuals