LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Cooling System (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipe, Removing And Installing >> Front Coolant Pipe, Removing And Installing >> Installing

Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

NOTE:

Secure all hose connections with hose clamps appropriate for the model. Refer to the appropriate Electronic Parts Information.

-- Check the coolant level and fill, if necessary. Refer to Coolant Level, Checking after Repair .

scientia non olet · About LEMON Manuals