LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Cylinder Head, VALVETRAIN (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING >> Installing

Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Check the seals for damage. If the seals should be replaced, remove the cover. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Lubricate the seals on the sealing surface to the Camshaft Adjustment Valve 1 -N205- /Exhaust Camshaft Adjustment Valve 1 -N318- with engine oil.

scientia non olet · About LEMON Manuals