LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Lubrication (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pump, Removing And Installing >> Removing

Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
GWWN17-10407Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Remove the bolt -1- and remove the oil baffle -2-.

-- Pull the chain tensioner spring using the Elbow Assembly Tool:T10118  in the -direction of the arrow- and secure it with the Chain Tensioner Locking Tool:T40265  .

Fig 1: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the oil pump.

Fig 2: Locating Oil Pump Bolts
GWWA17-10749Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.