LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Lubrication (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Removing

Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Place the Used Oil Collection and Extraction Unit:SMN372500  under the engine and drain the engine oil.

-- Remove the bolts for the oil pan.

Fig 1: Identifying Lower Oil Pan Bolt Tightening Sequence
GWWA17-10270Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

The oil pan is sealed using a liquid sealant. Refer to the appropriate Electronic Parts Information.

The sealant has a high adhesion strength in the hardened state.

-- Carefully loosen the oil pan lower section from the bond.