LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Lubrication (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Installing

Mechanical Switch Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with hose clamps appropriate for the model. Refer to the appropriate Electronic Parts Information.

-- Coat the mechanical switch valve O-rings with engine oil and install the switch valve.

-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals