Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with hose clamps appropriate for the model. Refer to the appropriate Electronic Parts Information.

-- Install the engine oil cooler -3- with a new seal -2-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to Prepare the cooling system for filling: .

-- Fill with engine oil and then check the level. Refer to ENGINE OIL, DRAINING, REPLACING OIL FILTER AND FILLING .