Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the connectors from the ignition coil and remove them from the ignition coils at the same time.
-- Remove the bolts from the ignition coils "3 and 4" and remove the ignition coils.
-- Loosen the hose clamp -1- and remove the hose from the EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove the bolt -2- and then remove the crankcase ventilation hose -3- from oil separator.
-- Remove the bolts -arrows- and the oil separator.