Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Belt Routing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- When a used ribbed belt is being installed, pay attention to the running direction.

-- Position the ribbed belt as shown.

Vibration Damper
Ribbed Belt Tensioner
Generator
A/C Compressor

-- Turn the tensioner in the -direction of the arrow- and remove the Locking Pin:T10060 A .

Fig 2: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.