LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 13 Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Intake Side Balance Shaft, Removing And Installing >> Notes

Intake Side Balance Shaft, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

The needle bearing must be replaced after every removal. Install a new needle bearing with the same color coding.

scientia non olet · About LEMON Manuals