Camshaft Timing Chain, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Camshaft Timing Chain (With New Tools)

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Depending on the version of the Assembly Tool:T10352/2 or Assembly Tool:T10352/4
Counterhold - Vibration Damper:T10355
Locking Pin (3 pc.):T40011
Chain Tensioner Lever:T40243
Tensioner Locking Tool:T40267
Camshaft Locks:T40271

Special tools and workshop equipment required

Adapter:T40266

Fig 2: Adaptor
Courtesy of AUDI OF AMERICA, LLC
Vibration Damper Assembly Tool:T10531

Fig 3: Assembly Tool Set T10531
Courtesy of AUDI OF AMERICA, LLC

Individual components of the Vibration Damper Assembly Tool:T10531 :

Vibration Damper Assembly Tool - Counterhold Tool:T10531/1
Vibration Damper Assembly Tool - Tensioning Pins:T10531/2
Vibration Damper Assembly Tool - Turning Over Tool:T10531/3
Vibration Damper Assembly Tool - Knurled Nut:T10531/4