LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> ID.4 1st Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Assembly (4-Cylinder Direct Injection (2.0L, 4V, Ea 888 Gen III, Turbocharger, Chain Drive))) >> 10 Engine Assembly >> Assembly Mounts >> Pendulum Support, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Step Bolts Tightening Specification/Additional Turn
1. -2 and 3- 60 Nm
2. -1- 100 Nm
3. -1 to 3- 90° additional turn
scientia non olet · About LEMON Manuals