LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lubrication (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pump, Removing And Installing >> Removing

Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- and oil baffle.

Fig 1: Locating Oil Baffle Bolt
GWWA17-10746Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the chain tensioner spring using the : T10118  in the direction of the -arrow- and secure it with the : T40265  .

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the oil pump.

Fig 3: Locating Oil Pump Bolts
GWWA17-10749Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.