LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lubrication (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Oil Pan Lower Section, Removing And Installing, Plastic Oil Pan >> Removing

Oil Pan Lower Section, Removing And Installing, Plastic Oil Pan: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation -1-. Refer OVERVIEW - NOISE INSULATION to .

Fig 1: Locating Noise Insulation
GWWA10-11564Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place the : SMN372500  under the engine and drain the engine oil.

NOTE:

Follow all waste disposal regulations!

-- Remove the bolts -1 through 20- and remove the oil pan.

GWWA17-10825Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1- and remove the oil baffle -2-.

GWWN17-10407Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.