LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lubrication (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Oil Pan Lower Section, Removing And Installing, Plastic Oil Pan >> Installing

Oil Pan Lower Section, Removing And Installing, Plastic Oil Pan: Installing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pan Lower Section - Tightening Sequence (Made Of Plastic)
GWWA17-10825Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install a new oil baffle. Tightening specification. Refer to -Item  ) Oil Baffle

-- Tighten the new bolts -1 through 20- in two stages in the sequence shown:

Step Tightening Sequence and Tightening Specification
1. Bolts -1 through 20- Pre-tighten to 8 Nm
2. Bolts -1 through 20- 90° additional turn

-- Fill with engine oil and then check the level. Refer to ENGINE OIL, DRAINING, REPLACING OIL FILTER, AND FILLING .

scientia non olet · About LEMON Manuals