Overview - Engine Oil Cooler

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Engine Oil Cooler

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Auxiliary Components Bracket
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Seal
- Replace after removing
O-Rings
Mechanical Switch Valve
- Replacing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
Engine Oil Cooler
- See note. Refer to OIL PAN/OIL PUMP .
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Seal
- Replace after removing
- Coat with coolant
Connection
Bolt
- 8 Nm + 45° turn
- Replace after removing