LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lubrication (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Removing

Mechanical Switch Valve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Remove the mechanical switch valve -1- from the auxiliary components bracket in direction of -arrow-.

Fig 1: Identifying Mechanical Switch Valve
GWWA17-10918Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals