Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the ignition coil sensors connectors and remove them from the ignition coils at the same time.
-- Remove the ignition coils bolts "3, 4", and remove the ignition coils.
-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove bolt -2- and then remove crankcase ventilation hose -3- from oil separator.
-- Remove the bolts -arrows- and the oil separator.