LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (4-Cylinder Direct Fuel Injection (1.4L Engine, 4V, Ea211, Turbocharger)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Ribbed Belt, Removing And Installing, Vehicles Without A/C Compressor >> Removing

Ribbed Belt, Removing And Installing, Vehicles Without A/C Compressor: Removing

GWWN13-10540Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To release the tension on the ribbed belt, turn the tensioner counter-clockwise, in direction of -arrow-.

-- Lock the tensioner using the : T10060A  .

-- If the ribbed belt is to be reused, mark the running direction with chalk or a felt-tip pen for reinstallation.

-- Remove the ribbed belt.

scientia non olet · About LEMON Manuals