Charge Air Pressure Actuator -V465-, REMOVING AND INSTALLING, VERSION 2: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -arrows- and remove the right drive axle heat shield.

Fig 1: Drive Axle Heat Sheild

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the resonator for the intake air scoop. Refer to INTAKE AIR SCOOP RESONATOR, REMOVING AND INSTALLING .

-- Remove the air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Open the bracket -1- and remove the coolant hose -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- using :VAS6234  and :T10405  .

Fig 2: Locating Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the support -1- upward.

-- Remove the lock washers -3- and operating lever -4-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Disconnect the connector -2- and remove the Charge Air Pressure Actuator -V465- -1-.