Assembly Instructions on HID Headlamp Bulbs
CAUTION:
- Before replacing an HID bulb, the corresponding electrical consumer must always be switched off.
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Do not touch an HID headlamp bulb glass with bare hands, use clean gloves. The remaining fingerprint would evaporate due to the heat of the operated HID headlamp bulb and condense on the reflector which would impair headlamp luminosity.
- An HID headlamp bulb must be replaced with an HID headlamp bulb of the same version. Bulb identification can be found on the bulb socket or on the bulb glass.
- Connectors must engage correctly during installation and make sure the connection is secure.