Left Front Turn Signal Bulb -M5- /Right Front Turn Signal Bulb -M7-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

CAUTION:

There is a risk of damaging the headlamp.

Do not touch the lamp bulb glass with bare fingers. Fingers leave traces of grease on the bulb glass that will evaporate and cloud the bulb glass when the lamp is switched on.
Use clean gloves, for example, to insert the bulbs.
During installation, ensure proper seating of the cap. Water getting in the headlamp will cause damage.

-- Perform a function test.

-- Check the headlamp adjustment and adjust the headlamp if necessary.