Overview - Turbocharger
WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Overview - Turbocharger, Part I
- O-Ring
- Replace after removing
- Coat with engine oil
- Bolt
- 9 Nm
- Coolant Supply Line
- O-Ring
- Replace after removing
- Coat with coolant
- Seal
- Replace after removing
- Nut
- 25 Nm
- Replace after removing
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Oil Supply Line
- Heat Shield
- Bolt
- 9 Nm
- Nut
- 9 Nm
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Coat with engine oil
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Connection
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
Overview - Turbocharger, Part II
- Bolt
- 9 Nm
- Oil Return Line
- O-Ring
- Replace after removing
- Coat with engine oil
- Bolt
- 10 Nm
- Charge Pressure Actuator -V465-
- Nut
- 10 Nm
- Secure with Mini Torque Wrench: VAS6854
- Bolt
- 9 Nm
- Connection
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Turbocharger Recirculation Valve -N249-
- Note the installation position. Refer to Fig 3.
- Removing and Installing. Refer to Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing
- Coat with coolant
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Coolant Return Line
- O-Ring
- Replace after removing
- Coat with coolant
- O-Ring
- Replace after removing
- Coat with engine oil
- Bolt
- 30 Nm
- Coat the thread with hot bolt paste. Refer to the Parts Information.
- Bracket
- For the turbocharger
- Bolt
- 30 Nm
- Bolt
- 9 Nm
Installation Position of Turbocharger Recirculation Valve N249
-- Note installation location -arrows-.