LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Turbocharger, Supercharger (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 21 Turbocharger, Supercharger >> Charge Air System >> Overview - Charge Air Hose Connections

Overview - Charge Air Hose Connections

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Installing Hose Connections with Threaded Connections

NOTE:

Tighten the clamps -A- on the charge air pipes to 5.5 Nm. An insufficient or excessive tightening torque can cause the charge air hose to come off the charge air pipe while driving.

Fig 1: Exploded View Of Charge Air Hose Connections
GWWN21-10260Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Before testing or performing a repair, check all air guide pipes and hoses and all vacuum lines for leaks and secure seating.

-- Clean the hose connections as well as the air guide pipes and hoses before installing, they must be free of oil and grease.

-- Secure hose connections with standard production clamps. Refer to the Parts Information.

-- The screws on the used clamps must be sprayed with a rust remover before installing.