Air Duct Pipe From Charge Air Cooler To Intake Manifold, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Loosen the hose clamp -2- and remove the air duct hose from the charge air cooler.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the hose clamp -2-.

Fig 1: Disconnect Charge Air Pressure Sensor Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the coolant hose -3-.

-- Remove the bolts -arrows-.

-- Remove the Charge Air Pressure Sensor -G31-. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .

-- Remove the air duct pipe.