LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Cylinder Head, VALVETRAIN (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING >> Removing

Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Unclip the coolant and fuel lines and set them aside.

-- Disconnect the connector -1- from the Camshaft Adjustment Valve 1 -N205-.

-- Remove the bolts -arrows- and then the Camshaft Adjustment Valve 1 -N205- -2-.

Fig 1: Identifying Bolts And Camshaft Adjustment Valve 1
GWWM15-10017Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals