LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Golf Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection (1.8L; 2.0L, 4V, Turbocharger, Chain Drive, Ea888, Generation III))) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Sealing Flange, Removing And Installing, Transmission Side >> Removing

Sealing Flange, Removing And Installing, Transmission Side: Removing

WARNING: This page is about a different car, the 2021 Volkswagen GTI, 2020 Volkswagen GTI, 2019 Volkswagen GTI, 2018 Volkswagen Golf, and 2018 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .

-- Disengage the intermediate plate at the sealing flange and at the alignment sleeves -arrows-.

Fig 1: Installing Intermediate Plate
GWWN13-10562Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 through 8-.

GWWA13-10509Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the sealing flange.

scientia non olet · About LEMON Manuals