Toothed Belt Sprocket, Removing And Installing: Installing

• The camshafts are secured in the "TDC point".
• The camshaft sprockets are positioned to each other.
• The crankshaft is at "TDC point".

-- Replace the O-ring for the plug if it is damaged.

-- Replace the bolts that were tightened with an additional turn.

-- Replace the intake side camshaft adjuster bolt -1- all the way.

Fig 1: Identifying Camshaft Sprocket Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the exhaust side toothed belt sprocket bolt -2- all the way.

• The camshaft sprockets must still turn on the camshafts and may not tip.

-- Position the toothed belt on the camshafts and adjust the valve timing. Refer to Installing .

Further assembly is performed in reverse order.