Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Place the : SMN372500 under the engine and drain the engine oil.

-- Remove the bolts for the oil pan.

Fig 1: Identifying Lower Oil Pan Bolt Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The oil pan is sealed using a liquid sealant. Refer to the Parts Information.

The sealant has a high adhesion strength in the hardened state.

-- Carefully loosen the oil pan lower section from the bond.