Engine Oil Cooler, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
NOTE:
Replace the gaskets and seals.
Secure all hose connections with hose clamps appropriate for the model. Refer to the Parts Information.
-- Install the engine oil cooler -3- with a new seal -2-.
-- Install the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
-- Fill with coolant. Refer to Prepare the Cooling System for Filling: .
-- Fill with engine oil and then check the level. Refer to ENGINE OIL, DRAINING AND REPLACING OIL FILTER, 2.0L TSI ENGINES