LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Atlas SEL R-Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Crankshaft, Cylinder Block (2.0L)) >> 13 Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Exhaust Side Balance Shaft, Removing And Installing >> Removing

Exhaust Side Balance Shaft, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the upper timing chain cover. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chain and balance shaft drive chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- for the exhaust side balance shaft and remove the balance shaft.

Fig 1: Identifying Intake Camshaft Balance Shaft
GWWA15-10467Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.