Radiator Fan, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

NOTE:

During installation, all cable ties must be installed at the same location.

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Disconnect the connector -6-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the connector -7-.

-- Remove the bolts -1- for the Radiator Fan -VX57- -2-.

-- Remove the bolts -5- for the Radiator Fan 2 -V177- -4-.