Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING: Removing

-- Remove the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Lift the clips -1- and remove the coolant hoses.

Fig 1: Identifying Coolant Hose Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connector -1- from the Engine Temperature Control Actuator -N493-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 to 5-.

Fig 2: Engine Temperature Control Actuator Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Temperature Control Actuator -N493- from the centering pin and disconnect it from the engine oil cooler.