Coolant Pump, Removing And Installing: Installing

Fig 1: Identifying Controller Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal and note the following:

-- Install the coolant pump and toothed belt.

-- Pay attention that the centering piece -arrows- and seal -3- are seated correctly.

-- Tighten the bolts -1 to 4- with the toothed belt mounted. Tightening specification and sequence. Refer to Figure.

Fig 2: Coolant Pump - Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If a new coolant pump was installed, remove the protective cap -1-.

Fig 3: Identifying Coolant Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Fill with coolant. Refer to Prepare the Cooling System for Filling: .