Upper Coolant Pipes, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the ignition coil with power output stages cylinder "3". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

-- Release the retainers in direction of -arrows- and remove wiring duct -1- from bracket.

Fig 1: Identifying Bracket And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clamp off the coolant hoses to the front and behind the coolant pipe using : 3094 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the bolt -1- and remove the upper coolant pipe.