LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Atlas SE R-Line, FWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger >> 21 Turbocharger, Supercharger >> Charge Air System >> Turbocharger Air Duct Pipe/Charge Air Cooler, Removing And Installing

Turbocharger Air Duct Pipe/Charge Air Cooler, Removing And Installing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Loosen the hose clamps -arrows- and remove the left charge air hose -1-.

GWWN21-10975Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the wiring harness -1 and 2-.

GWWN21-10970Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -3-.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the air duct pipe to the turbocharger.

Fig 1: Identifying Clamps With Air Guide Pipe
GWWA21-10818Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the release button on the crankcase ventilation hose -1- and remove the hose.

GWWN21-10979Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow- and turn the support -2- toward the rear and remove.

-- Free up the wiring harness -1- from the air duct pipe.

GWWN21-10969Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the screw-type clamp -2-.

-- Remove the bolt -3-.

-- Remove the air duct pipe -4- upward.