Charge Air Pressure Actuator -V465-, REMOVING AND INSTALLING: Removing

-- Remove the catalytic converter/particulate filter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Disconnect the connector -4-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the lock nut -2- a quarter turn, to do so counterhold on the control rod hex fitting -arrow-.

-- Remove the control rod from the operating lever -1- at the same time do not turn the lock nut.

-- Remove the bolts -3- and then the Charge Air Pressure Actuator -V465-.