Turbocharger Air Duct Pipe/Charge Air Cooler, Removing And Installing
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Loosen the hose clamps -arrows- and remove the left charge air hose -1-.
-- Free up the wiring harness -1 and 2-.
-- Remove the bolt -3-.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1- and remove the air duct pipe to the turbocharger.
-- Press the release button on the crankcase ventilation hose -1- and remove the hose.
-- Remove the bolt -arrow- and turn the support -2- toward the rear and remove.
-- Free up the wiring harness -1- from the air duct pipe.
-- Loosen the screw-type clamp -2-.
-- Remove the bolt -3-.
-- Remove the air duct pipe -4- upward.