Overview - Charge Air System, Golf, PASSAT, TIGUAN And ARTEON

NOTE:

Assembly of screw-type clamps for the charge air hose connections. Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .

Before testing or performing a repair, check all air duct pipes and hoses and vacuum lines for leaks and secure seating.

Fig 1: Exploded View Of Charge Air System

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Air Duct Pipe
- Removing and Installing. Refer to TURBOCHARGER AIR DUCT PIPE/CHARGE AIR COOLER, REMOVING AND INSTALLING .
Grommet
Spacer Sleeve
Bolt
- 7 Nm
Charge Air Hose
- Installing. Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .
Sealing Strip
Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
  NOTE:
  If there are small impressions on the slats, refer to RADIATOR AND CONDENSER ASSEMBLY .
Sealing Strip
Rubber Bushing
- For the charge air cooler
Rubber Bushing
- For the charge air cooler
Bolt
- 7 Nm
Spacer Sleeve
Grommet
Bolt
- 5 Nm
Charge Air Pressure Sensor -G31-
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
O-Ring
- Replace
Charge Air Hose
- Installing. Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .
Air Duct Pipe