Camshaft Seal For Intake Camshaft, Removing And Installing, Belt Pulley Side: Installing

Fig 1: Identifying Fitting Sleeve And Guide Sleeve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Do not coat the new seal with oil.

-- Slide the seal -1- over the : T10478/3  in direction of -arrow- onto the : T10478/2  in direction of -arrow-.

• Installed position: the closed side of the seal faces the seal installer.

-- Separate the fitting sleeve and guide sleeve.

-- Mount the : T10478/2  with the seal -1- on the camshaft.

Fig 2: Identifying Guide Sleeve With Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the seal with the : T10478/1A  and the >>old<< bolt -1- for the camshaft sprocket all the way.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the camshaft adjuster. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .