Oil Spray Jets, Removing And Installing: Installing

NOTE:

There is a risk of damaging the oil spray jets through distortions.

Never bend the oil spray jets.

Install in reverse order of removal and note the following:

Installation position: the guiding edge of the oil spray jet -2- to the machined surface of the cylinder block.

Fig 1: Exploded View Of Oil Spray Jet And Pressure Relief Valve
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt with Pressure Relief Valve
Oil Spray Jet

-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Install the noise insulation. Refer to OVERVIEW - NOISE INSULATION .