Vibration Damper, Removing And Installing: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Position the engine in the "TDC position for cylinder 1". Refer to VALVE TIMING, CHECKING .

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Loosen the bolt -arrow- for the vibration damper by using the : T10475  .

Fig 1: View Of Loosening Bolt For Vibration Damper By Using Counterhold - Pulley - T10475-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt and the vibration damper.