LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2020 >> Golf Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (4-Cylinder Direct Fuel Injection (1.4L Engine, 4V, Ea211, Turbocharger)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Dimensions

Crankshaft Dimensions

NOTE:

There is a risk of damaging the bearing block when removing the crankshaft.

Loosening the crankshaft bearing cap bolts deforms the cylinder block bearing block and causes bearing damage.

Never remove the crankshaft.

It is not possible to measure crankshaft bearing play using workshop equipment.

Honing Dimension Connecting Rod Pin Diameter mm
Standard dimension 48.00 -0.022 -0.042
scientia non olet · About LEMON Manuals