Parking Aid Control Module -J446-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment.

-- Remove the ignition key, if equipped.

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors -3 and 4-.

Courtesy of AUDI OF AMERICA, LLC

-- To do so, push the tab -1-, pivot the retaining bracket in the direction of -arrow- and remove the connector.

Fig 1: Pressing Catch -1-, Turn Retaining Bracket In - Direction Of Arrow For Removal

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer on the bracket in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Parking Aid Control Module -J446- -1- downward from the bracket.