Wheel Changing And Wheel Installation

-- Coat the wheel centering seat with protective material. Refer to WHEEL CHANGING, PROTECTING WHEEL CENTERING SEAT AGAINST CORROSION .

Fig 1: Identifying Incorrect Tightening Method

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. When mounting a wheel, tighten all wheel bolts uniformly by hand.
2. Tighten the wheel bolts diagonally to approximately 30 Nm.
3. Lower the vehicles onto the floor. Tighten all the wheel bolts diagonally to the tightening specification using a torque wrench. Refer to WHEEL BOLTS TIGHTENING SPECIFICATION .