Axle Alignment Specified Values

Specified Values Valid For All Engine Versions.

Front Axle

Basic/DCC FWD & Basic/DCC AWD

PR numbers

G06/G07/G08/G10

Total toe (wheels not pressed)

10' ± 10'

Camber (wheels in straight-ahead position). Refer to ⁽¹⁾.

-16' ± 30'

Maximum permissible difference between both sides

maximum 30'

Toe differential angle at 20° steering angle. Refer to ⁽²⁾.

1° 21' ± 20'

Caster

7° 07' ± 30'

Maximum permissible difference between both sides

maximum 30'

Standing height

433 ± 10 mm

⁽¹⁾	Camber corrections are not possible. It can only be slightly corrected by pushing the subframe.

⁽²⁾	The toe angle difference can also be indicated negatively in alignment computer, depending on manufacturer.

Specified Values Valid For All Engine Versions.

Rear Axle	Basic/DCC FWD & Basic/DCC AWD
PR numbers	G06/G07/G08/G10
Camber	-1°20' ± 30'
Maximum permissible difference between both sides	maximum 30'
Total toe	+10' ± 10'
Maximum permissible deviation from the driving axle	maximum 20'
Standing height	445 ± 10 mm