Overview - Knee Airbag
- Knee Airbag with the Driver Knee Airbag Igniter -N295-
- Removing and Installing. Refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .CAUTION:
The risk of damaging the knee airbag surface due to mechanical stress is to be prevented.
- After finishing the procedure, perform a visual inspection to make sure the surface of the knee airbag is not damaged, especially along the perforation area.
- Removing and Installing. Refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
- Attachment Point
- For the knee airbagCAUTION:
Avoid malfunctions due to faulty ground connections.
- Mounting thread and contact surface must be free of paint, coating, and corrosion.
- The threaded connection serves as a ground connection for the knee airbag.
- For the knee airbag
- Bolt
- 8 Nm
- Quantity: 3
- Connector
- For the Driver Knee Airbag Igniter -N295-