Charge Air Cooler, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- on the left and right.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip and remove the lower section -1- of the air duct.

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Remove the center guide -A- from the lock carrier -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the left and right radiator mount catches in direction of -arrows- with a side cutter. Push the upper coolant radiator slightly to the engine.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The radiator mount will be used again when installing. It is then attached to the lock carrier. Bolts. Refer to the Parts Information.

-- Loosen the hose clamps -1 and 2- and remove the charge air hose.

Fig 1: Identifying Clamps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Seal the open lines and connections with clean plugs from the :VAS6122 .

-- Have a second technician release the clamps -1- on the left and right side in the direction of -arrow A-. Remove the condenser -3- upward out of the mounts in direction of -B arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the condenser to the lock carrier.

-- Remove the charge air cooler downward.