Overview - Backrest Cover And Cushion

Fig 1: Exploded View Of Backrest Cover & Cushion

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Upholstery Clip
- For attaching the backrest cover to the backrest cushion
- Replace after removing.
- Install at the same location with Upholstery Clip Pliers:VAG1634 .
Clamping Strip
- Sewn into the backrest cover; ensure correct seating
- For seats with a pass-through, a zipper is installed instead of a clamping strip. For the "zipper" allocation, refer to the Parts Information.
Backrest Cover
- Different equipment levels
- Allocation. Refer to the Parts Information.
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Backrest cover and backrest cushion, separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
- Check that there are no folds after installing
Clip
- For securing the backrest cover on the rear frame
- Right and left
Backrest Frame
Backrest Cushion
- Allocation. Refer to the Parts Information.
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Backrest cover and backrest cushion, separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .